A I A Houston : Doucments.

Documents:	0
Shipping:	$0.00
Tax:	$0.00
Total:	$0.00

A101-2007, Standard Form of Agreement Between Owner and Contractor where the Basis of Payment is a Stipulated Sum
A101-2007 is a standard form of agreement between owner and contractor for use where the basis of payment is a stipulated sum (fixed price). A101 adopts by reference, and is designed for use with, A201-2007, General Conditions of the Contract for Construction. A101 is suitable for large or complex projects. For projects of a more limited scope use of A107-2007, Agreement Between Owner and Contractor for a Project of Limited Scope, should be considered. For even smaller projects, consider A105-2007, Agreement Between Owner and Contractor for a Residential or Small Commercial Project.
$12.00 each

A105-2007 (formerly A105-1993 and A205-1993), Standard Form of Agreement Between Owner and Contractor for a Residential or Small Commercial Project
A105-2007 is a stand-alone agreement with its own general conditions; it replaces A105-1993 and A205-1993. A105-2007 is for use on a project that is modest in size and brief in duration, and where payment to the Contractor is based on a stipulated sum (fixed price). For larger and more complex projects, other AIA agreements are more suitable, such as A107-2007, Agreement Between Owner and Contractor for a Project of Limited Scope. A105-2007 and B105-2007, Standard Form of Agreement Between Owner and Architect for a Residential or Small Commercial Project, comprise the Small Projects family of documents. Although A105-2007 and B105-2007 share some similarities with other agreements, the Small Projects family should NOT be used in tandem with agreements in other document families without careful side-by-side comparison of contents.
$10.00 per document

A107-2007, Standard Form of Agreement Between Owner and Contractor for a Project of Limited Scope
A107-2007 is a stand-alone agreement with its own internal general conditions and is intended for use on construction projects of limited scope. It is intended for use on medium-to-large sized projects where payment is based on either a stipulated sum or the cost of the work plus a fee, with or without a guaranteed maximum price. Parties using A107-2007 will also use A107, Exhibit A, if using a cost-plus payment method. B104-2007, Standard Form of Agreement Between Owner and Architect for a Project of Limited Scope, coordinates with A107-2007 and incorporates it by reference.
$12.00 each

A132-2009 (formerly A101CMa- 1992), Standard Form of Agreement Between Owner and Contractor, Construction Manager as Adviser Edition
AIA Document A132- 2009 is a standard form of agreement between owner and contractor for use on projects where the basis of payment is either a stipulated sum (fixed price) or cost of the work plus a fee, with or without a guaranteed maximum price. In addition to the contractor and the architect, a construction manager assists the owner in an advisory capacity during design and construction. The document has been prepared for use with AIA Document A232-2009, General Conditions of the Contract for Construction, Construction Manager as Adviser Edition; B132-2009, Standard Form of Agreement Between Owner and Architect, Construction Manager as Adviser Edition; and C132-2009, Standard Form of Agreement Between Owner and Construction Manager as Adviser. This integrated set of documents is appropriate for use on projects where the construction manager only serves in the capacity of an adviser to the owner, rather than as constructor (the latter relationship being represented in A133-2009 and A134-2009). NOTE: A101CMa-1992 expired on December 31, 2010.
$12.00 each

A133-2009(formerly A121CMc-2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee with a Guaranteed Maximum Price
AIA Document A133-2009 is intended for use on projects where a construction manager, in addition to serving as adviser to the owner, assumes financial responsibility for construction of the project. The construction manager provides the owner with a guaranteed maximum price proposal, which the owner may accept, reject, or negotiate. Upon the owner's acceptance of the proposal by execution of an amendment, the construction manager becomes contractually bound to provide labor and materials for the project and to complete construction at or below the guaranteed maximum price. The document divides the construction manager's services into two phases: the preconstruction phase and the construction phase, portions of which may proceed concurrently in order to fast track the process. A133-2009 is coordinated for use with AIA Documents A201-2007, General Conditions of the Contract for Construction, and B103-2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project. NOTE: A121CMc-2003 expired on May 31, 2010.
$12.00 each

A134-2009(formerly A131CMc-2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee without a Guarantee Maximum Price Similar to A133-2009, this construction manager as
Similar to A133 -2009, this construction manager as constructor agreement is intended for use when the owner seeks a construction manager who will take on responsibility for providing the means and methods of construction. However, in AIA Document A134-2009 the construction manager does not provide a Guaranteed Maximum Price (GMP). A134-2009 employs the cost-plus-a-fee method, wherein the owner can monitor cost through periodic review of a control estimate that is revised as the project proceeds. The agreement divides the construction manager's services into two phases: the preconstruction phase and the construction phase, portions of which may proceed concurrently in order to fast track the process. A134-2009 is coordinated for use with AIA Documents A201-2007, General Conditions of the Contract for Construction, and B103-2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project. NOTE: A131CMc-2003 expired on May 31, 2010. CAUTION: To avoid confusion and ambiguity, do not use this construction management document with any other AIA construction management document.
$12.00 each

A141-2004, Agreement Between Owner and Design-Builder
A141-2004 replaces A191-1996 and consists of the Agreement and three exhibits, Exhibit A, Terms and Conditions, Exhibit B, Determination of the Cost of the Work, and Exhibit C, Insurance and Bonds. Exhibit B is not applicable if the parties select to use a Stipulated Sum. A141-2004 obligates the Design-Builder to execute fully the Work required by the Design-Build Documents, which include A141-2004 with its attached exhibits, the project criteria and the design-builder's proposal, including any revisions to those documents accepted by the owner, supplementary and other conditions, addenda and modifications. The Agreement requires the parties to select the payment type from three choices: (1) Stipulated Sum, (2) Cost of the Work Plus Design-Builder's Fee, and (3) Cost of the Work Plus Design-Builder's Fee with a Guaranteed Maximum Price. A141-2004 with its attached exhibits forms the nucleus of the Design-Build Contract. Because A141-2004 includes its own Terms and Conditions, it does not use A201-1997.
$12.00 each

A142-2004, Agreement Between Design-Builder and Contractor
A142-2004 replaces A491-1996 and consists of the Agreement and five exhibits: Exhibit A, Terms and Conditions; Exhibit B, Preconstruction Services; Exhibit C, Contractor's Scope of Work; Exhibit D, Determination of the Cost of the Work; and Exhibit E, Insurance and Bonds. Unlike B491-1996, A142-2004 does not rely on A201 for its general conditions of the contract. A142-2004 contains its own Terms and Conditions. A142-2004 obligates the contractor to perform the work in accordance with the Contract Documents, which include A142-2004 with its attached exhibits, supplementary and other conditions, drawings, specifications, addenda, and modifications. Like A141-2004, A142-2004 requires the parties to select the payment type from three choices: (1) Stipulated Sum, (2) Cost of the Work Plus Design-Builder's Fee, and (3) Cost of the Work Plus Design-Builder's Fee with a Guaranteed Maximum Price.
$12.00 each

A151-2007, Standard Form of Agreement Between Owner and Vendor for Furniture, Furnishings and Equipment where the basis of payment is a Stipulated Sum
A151-2007 is intended for use as the contract between Owner and Vendor for Furniture, Furnishings and Equipment (FF&E) where the basis of payment is a stipulated sum (fixed price) agreed to at the time of contracting. A151-2007 adopts by reference and is intended for use with A251-2007, General Conditions of the Contract for Furniture, Furnishings, and Equipment. It may be used in any arrangement between the owner and the contractor where the cost of FF&E has been determined in advance, either through bidding or negotiation.
$12.00 each

A195-2008 Standard Form of Agreement Between Owner and Contractor for Integrated Project Delivery
Purpose: Integrated Project Delivery is a project delivery approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and construction. AIA Document A195-2008 is a standard form of agreement between Owner and Architect for Integrated Project Delivery.

A195-2008 primarily provides the terms and conditions that will govern the Agreement, A195-2008 does not include a specific scope of the Contractor's services, rather it references AIA Documents A295-2008, General Conditions of the Contract for Integrated Project Delivery, which sets forth the Contractor's scope of Services. A195-2008 is intended for use on a project where the basis for payment is the Cost of the Work plus a fee where a guaranteed maximum price (which consists of the Cost of the Work plus the Contractor's Fee) is provided. A195-2008 is not intended for use in competitive bidding.

Related Documents: A195-2008 is intended for use in conjunction with A295-2008, which it incorporates by reference. A295-2008 integrates the duties and services of the Owner, Architect, and Contractor through each phase of Integrated Project Delivery. A295-2008 describes the services and duties of the Owner, Contractor and Architect in six phases: Conceptualization; Criteria Design; Detailed Design; Implementation Documents; Construction; and Closeout. Before transmitting Instruments of Service or other information in digital form, parties should establish protocols for that transmission and may use E201-2007, Digital Data Protocol Exhibit, for that purpose.
$12.00 each

A201-2007, General Conditions of the Contract for Construction
The General Conditions are an integral part of the contract for construction for a large project and they are incorporated by reference into the owner-contractor agreement. They set forth the rights, responsibilities, and relationships of the owner, contractor, and architect. Though not a party to the contract for construction between owner and contractor, the architect participates in the preparation of the contract documents and performs construction phase duties and responsibilities described in detail in the general conditions. A201-2007 is adopted by reference in owner-architect, owner-contractor, and contractor-subcontractor agreements in the A201 family of documents; thus, it is often called the "keystone" document.
$12.00 each

A232-2009(formerly A201CMa-1992), General Conditions of the Contract for Construction, Construction Manager as Adviser Edition
AIA Document A232-2009 sets forth the rights, responsibilities, and relationships of the owner, contractor, construction manager and architect. A232-2009 is adopted by reference in owner/architect, owner/contractor, and owner/construction manager agreements in the CMa family of documents. Under A232-2009, the construction manager serves as an independent adviser to the owner, who enters into a contract with a general contractor or multiple contracts with prime trade contractors. NOTE: A201CMa-1992 expired on December 31, 2010. CAUTION: Do not use A232-2009 in combination with agreements where the construction manager takes on the role of constructor, such as in AIA Document A133-2009 or in A134-2009.
$12.00 each

A251-2007, General Conditions of the Contract for Furniture, Furnishings, and Equipment
A251-2007 provides general conditions for the A151-2007, Standard Form Agreement between Owner and Vendor for Furniture, Furnishings and Equipment where the Basis of Payment is a Stipulated Sum. A251-2007 sets forth the duties of the owner, architect, and vendor, just as the A201-2007, General Conditions of the Contract for Construction, does for building construction projects. Because the Uniform Commercial Code (UCC) governs the sale of goods and has been adopted in nearly every jurisdiction, A251-2007 recognizes the commercial standards set forth in Article 2 of the UCC, and uses certain standard UCC terms and definitions. A251-2007 was renumbered in 2007 and modified, as applicable, to coordinate with A201-2007.
$12.00 each

A295-2008 General Conditions of the Contract for Integrated Project Delivery
AIA Document A295-2008, provides the terms and conditions for AIA Documents A195-2008 Standard Form of Agreement Between Owner and Contractor for Integrated Project Delivery, and B195-2008, Standard Form of Agreement Between Owner and Architect for Integrated Project Delivery, both of which incorporate AIA Document A295-2008 by reference. Those agreements provide primarily only business terms and rely upon A295-2008 for the architect's services, the contractor's pre-construction services, and the conditions of construction. A295 not only establishes the duties of the owner, architect and contractor, but also sets forth in detail how they will work together through each phase of the project: conceptualization, criteria design, detailed design, implementation documents, construction, and closeout. A295 requires that the parties utilize building information modeling.
$14.00 each

A441-2008 Standard Form of Agreement Between Contractor and Subcontractor for a Design-Build Project
AIA Document A441-2008 is a fixed price agreement that establishes the contractual relationship between the contractor and subcontractor in a design-build project. A441-2008 incorporates by reference the terms and conditions of AIA Document A142-2004, Standard Form of Agreement Between Design-Builder and Contractor, and was written to ensure consistency with the AIA 2004 Design-Build family of documents. Because subcontractors are often required to provide professional services on a design-build project, A441-2008 provides for that possibility.
$10.00 each

B101-2007, Standard Form of Agreement Between Owner and Architect
B101-2007 is a one-part standard form of agreement between owner and architect for building design and construction contract administration. B101-2007 was developed to replace AIA Documents B141-1997, Parts 1 and 2, and B151-1997, but it more closely follows the format of B151-1997. Services are divided traditionally into Basic and Additional Services. Basic Services are performed in five phases: Schematic Design, Design Development, Construction Documents, Bidding and Negotiation, and Construction. This agreement may be used with a variety of compensation methods, including percentage of construction cost and stipulated sum. B101-2007 is intended to be used in conjunction with A201-2007, General Conditions of the Contract for Construction, which it incorporates by reference.
$12.00 each

B102-2007, Standard Form of Agreement Between Owner and Architect without a Predefined Scope of Architect's Services
B102-2007 replaces and serves the same purpose as B141-1997 Part 1. B102-2007 is a standard form of agreement between owner and architect that contains terms and conditions and compensation details. B102-2007 does not include a scope of Architect's services, which must be inserted in Article 1 or attached as an exhibit. The separation of the scope of services from the owner-architect agreement allows users the freedom to append alternative scopes of services. AIA standard form scopes of services documents that may be paired with B102-2007 include B203-2007, Site Evaluation and Planning; B204-2007, Value Analysis; B205-2007, Historic Preservation; B206-2007, Security Evaluation and Planning; B209-2007, Construction Contract Administration; B210-2007, Facility Support Services; B211-2007, Commissioning; B214-2007, LEED Certification; B252-2007, Architectural Interior Design; and B253-2007, Furniture, Furnishings and Equipment Design.
$12.00 each

B103-2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project
B103-2007 is a standard form of agreement between owner and architect intended for use on large or complex projects. B103-2007 was developed to replace AIA Documents B141-1997, Parts 1 and 2, and B151-2007 specifically with respect to large or complex projects. B103-2007 assumes that the owner will retain third parties to provide cost estimates and project schedules, and may implement fast-track, phased or accelerated scheduling. Services are divided along the traditional lines of Basic and Additional Services. Basic Services are based on five phases: Schematic Design, Design Development, Construction Documents, Bidding and Negotiation, and Construction. The architect does not prepare cost estimates, but designs the project to meet the owner's budget for the cost of the work at the conclusion of the Design Development Phase Services. This document may be used with a variety of compensation methods. B103-2007 is intended to be used in conjunction with A201-2007, General Conditions of the Contract for Construction, which it incorporates by reference.
$12.00 each

B105-2007, Standard Form of Agreement Between Owner and Architect for a Residential or Small Commercial Project
B105-2007 is a standard form of agreement between owner and architect intended for use on a residential or small commercial project that is modest in size and brief in duration. B105-2007 and AIA Document A105-2007, Standard Form of Agreement Between Owner and Contractor for a Residential or Small Commercial Project, comprise the Small Projects family of documents. B105-2007 is intended for use with A105-2007, which it incorporates by reference. B105-2007 is extremely abbreviated and is formatted more informally than other AIA agreements. Although A105-2007 and B105-2007 share some similarities with other AIA agreements, the Small Projects family should NOT be used with other AIA document families without careful side-by-side comparison of contents.
$6.00 each

B107-2010 (formerly B188-1996), Standard Form of Agreement Between Developer-Builder and Architect for Prototype(s) for Single Family Residential Project.
AIA Document B107-2010 is a standard form of agreement between developer-builder and architect for design of one or more prototype(s) for a single family residential project. AIA Document B107-2010 is intended for use in situations where the architect will provide limited architectural services in connection with a single family residential project. Under B107-2010, the architect's services consist of development of Permit Set Documents and limited construction phase services for the first residence of each prototype design constructed by the developer-builder in the development. This document anticipates that the developer-builder will have extensive control over the management of the project, acting in a capacity similar to that of a developer or speculative builder of a housing project, and that the developer-builder is an entity that has experience with applicable residential building codes, selection of materials and systems, and methods of installation and construction. NOTE: B107-2010 replaces AIA Document B188-1986 (expired April 30, 2010).
$12.00 each

B108-2009 (formerly B181-1994), Standard Form of Agreement Between Owner and Architect for a Federally Funded or Federally Insured Project
AIA Document B108-2009 is a standard form of agreement between Owner and Architect for building design and construction contract administration that is intended for use on federally funded or federally insured projects. AIA Document B108-2009 was developed with the assistance of several federal agencies and contains terms and conditions that are unique to federally funded or federally insured projects. B108 sets forth five traditional phases of basic services: schematic design, design development, construction documents, bidding or negotiation, and construction. Two other types of services are delineated in the document: optional services and additional services. B108 is structured so that either the owner or the architect may be the entity providing cost estimates. NOTE: B108-2009 replaces AIA Document B181-1994, which expired on May 31, 2011.
$12.00

B109-2010, Standard Form of Agreement Between Owner and Architect for a Multi-Family Residential or Mixed Use Residential Project
AIA Document B109-2010 is a standard form of agreement between owner and architect for building design and construction contract administration for a multi-family residential or mixed use residential project. B109-2010 contains terms and conditions that are unique to these types of projects. B109-2010 is based on AIA Document B103-2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project. AIA Document B109-2010 uses the traditional division of services into Basic and Additional Services but adds a new Pre-Design Services article that includes items such as assessment of project feasibility, layout, and regulatory requirements.

B109-2010 is not intended for use on residential projects that will include a residential condominium unless specifically set forth in the initial information. If B109-2010 is used for residential condominium projects, users should review and consider modifying B109-2010. AIA Document B509-2010, Guide for Supplementary Conditions to AIA Document B109-2010, includes a discussion of potential risks that may be inherent in residential condominium construction and offers model language for inclusion in B109-2010 to better allocate these risks.
$12.00 each

B132-2009 (formerly B141-Cma- 1992), Standard Form of Agreement Between Owner and Architect, Construction Manager as Adviser Edition
AIA Document B132-2009 is a standard form of agreement between owner and architect for use on building projects where construction management services are to be provided under a separate contract with the owner. It is coordinated with C132-2009, an owner/construction manager as adviser agreement, where the construction manager is an independent adviser to the owner throughout the course of the project. Both B132-2009 and C132-2009 are based on the premise that one or more separate construction contractors will also contract with the owner. The owner/contractor agreement is jointly administered by the architect and the construction manager under AIA Document A232-2009, General Conditions of the Contract for Construction, Construction Manager as Adviser Edition. NOTE: B141CMa-1992 expired on December 31, 2010.
$12.00 each

B142-2004, Agreement Between Owner and Consultant where the Owner Contemplates using the Design-Build Method of Project Delivery
B142-2004 provides a standard form for the upfront services an owner may require when considering design-build delivery. The consultant, who may or may not be an architect or other design professional, may perform a wide ranging array of services for the owner, including programming and planning, budgeting and cost estimating, project criteria development services, and many others, commencing with initial data gathering and continuing through to post occupancy. B142-2004 consists of the Agreement portion and two exhibits, Exhibit A, Initial Information, and Exhibit B, Standard Form of Consultants Services. Exhibit B provides a menu of briefly described services that the parties can select and augment to suit the needs of the project.
$12.00 each

B152-2007, Standard Form of Agreement Between Owner and Architect for Architectural Interior Design Services
B152-2007 is a standard form of agreement between the owner and architect for design services related to Furniture, Furnishings and Equipment (FF&E) as well as to architectural interior design. B152-2007 divides the architect's services into eight phases: Programming, Pre-lease Analysis and Feasibility, Schematic Design, Design Development, Contract Documents, Bidding and Quotation, Construction Phase Services, and FF&E Contract Administration. B152-2007 was re-numbered in 2007 and modified to align, as applicable, with B101-2007 and A201-2007. B152-2007 is intended for use in conjunction with A251-2007, General Conditions of the Contract for Furniture, Furnishings and Equipment, and A201-2007, General Conditions of the Contract for Construction, both of which it incorporates by reference.
$12.00 each

B153-2007, Standard Form of Agreement Between Owner and Architect for Furniture, Furnishings and Equipment Design Services
B153-2007 is a standard form of agreement between the owner and architect for design services related solely to Furniture, Furnishings and Equipment (FF&E). B153-2007 divides the architect's services into six phases: Programming, Schematic Design, Design Development, Contract Documents, Quotation, and FF&E Contract Administration. B153-2007 was renumbered in 2007 and modified to align, as applicable, with B101-2007. B153-2007 is intended for use in conjunction with A251-2007, General Conditions of the Contract for Furniture, Furnishings and Equipment, which it incorporates by reference.
$10.00 each

B161-2002, Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States
B161-2002 is designed to assist U.S. architects involved in projects based in foreign countries, where the U.S. architect is hired on a consulting basis for design services and the owner will retain a local architect in the foreign country. The document is intended to clarify the assumptions, roles, responsibilities, and obligations of the parties; to provide a clear, narrative description of services; and to facilitate, strengthen, and maintain the working and contractual relationship between the parties. Because of foreign practices, the term Owner has been replaced with Client throughout the document. Also, since it is assumed that the U.S. architect is not licensed to practice architecture in the foreign country where the project is located, the term Consultant is used throughout the document to refer to the U.S. architect. B161-2002 was re-numbered only in 2007; its content remains the same as in B611INT-2002.
$12.00 each

B162-2002, Abbreviated Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States
B162-2002 is an abbreviated version of B161-2002, Standard Form of Agreement between Client and Consultant. The document is designed to assist U.S. architects involved in projects based in foreign countries where the U.S. architect is hired on a consulting basis for design services and a local architect will be retained. The document is intended to clarify the assumptions, roles, responsibilities, and obligations of the parties; to provide a clear, narrative description of services; and to facilitate, strengthen, and maintain the working and contractual relationship between the parties. Because of foreign practices, the term Owner has been replaced with Client throughout the document. Also, since it is assumed that the U.S. architect is not licensed to practice architecture in the foreign country where the project is located, the term Consultant is used throughout the document to refer to the U.S. architect. B162-2002 was renumbered only in 2007; its content remains the same as in B621INT-2002.
$10.00 each

B188-1996, Standard Form of Agreement Between Owner and Architect for Limited Architectural Services forHousing Projects
B188-1996 is intended for use in situations where the architect will provide limited architectural services for a development housing project. It anticipates that the owner will have extensive control over the management of the project, acting in the capacity of a developer or speculative builder of a housing project. As a result, the owner or consultants retained by the owner will likely provide the engineering services, specify the brand names of materials and equipment, and administer payments to contractors, among other project responsibilities. B188-1996 is not coordinated for use with any other AIA standard form documents.
$12.00 each

B195-2008 Standard Form of Agreement Between Owner and Architect for Integrated Project Delivery
Purpose: Integrated Project Delivery is a project delivery approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and construction. AIA Document B195-2008 is a standard form of agreement between Owner and Architect for Integrated Project Delivery.

B195-2008 primarily provides the terms and conditions that will govern the Agreement. B195-2008 does not include the specific scope of the Architect's services; rather it references AIA Document A295-2008, General Conditions of the Contract for Integrated Project Delivery, which sets forth the Architect's scope of Services.

Related Documents: B195-2008 is intended for use in conjunction with A295-2008, which it incorporates by reference. A295-2008 integrates the duties and services of the Owner, Architect and Contractor through each phase of Integrated Project Delivery. A295-2008 describes the services and duties of the Owner, Contractor and Architect in six phases: Conceptualization; Criteria Design; Detailed Design; Implementation Documents; Construction; and Closeout. B195-2008 also can be used with Architect-Consultant agreements such as AIA Document C401-2007. Before transmitting Instruments of Service or other information in digital form, parties should establish protocols for that transmission and may use E201-2007, Digital Data Protocol Exhibit, for that purpose.
$12.00 each

B201-2007, Standard Form of Architect's Services: Design and Construction Contract Administration
B201-2007 replaces AIA Document B141-1997 Part Two. B201-2007 defines the architect's traditional scope of services for design and construction contract administration in a standard form that the owner and architect can modify to suit the needs of the project. The services set forth in B201-2007 parallel those set forth in AIA Document B101-2007: the traditional division of services into Basic and Additional Services, with five phases of Basic Services. B201-2007 may be used in two ways:(1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B201-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement.
$12.00 each

B202-2009, Standard Form of Architect's Services: Programming
AIA Document B202-2009 establishes duties and responsibilities where the architect provides the owner with programming services. The architect's programming services are set forth in a series of iterative steps, from a broad identification of priorities, values and goals of the programming participants to working with the owner to confirm the owner's objectives for the project. The programming services also include information gathering to develop performance and design criteria, and developing a final program of project requirements. AIA Document B202-2009 may be used in two ways: (1) incorporated into the owner/architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to AIA Document G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner/architect agreement. B202-2009 is a scope of services document only and may not be used as a stand-alone owner/architect agreement.
$12.00 each

B203-2007, Standard Form of Architect's Services: Site Evaluation and Planning
B203-2007 is intended for use where the architect provides the owner with services to assist in site selection for a project. Under this scope, the architect's services may include analysis of the owner's program and alternative sites, site utilization studies, and other analysis, such as planning and zoning requirements, site context, historic resources, utilities, environmental impact, and parking and circulation. B203-2007 may be used in two ways:(1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B203-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B203-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B204-2007, Standard Form of Architect's Services: Value Analysis
B204-2007 establishes duties and responsibilities when the owner has employed a Value Analysis Consultant. This document provides the architect's services in three categories: Pre-Workshop Services, Workshop Services and Post-Workshop Services. The services include presenting the project's goals and design rationale at the Value Analysis Workshop, reviewing and evaluating each Value Analysis Proposal, and preparing a Value Analysis Report for the owner that, among other things, advises the owner of the estimate of the cost of the work resulting from the implementation of the accepted Value Analysis Proposals. B204-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architects sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B204-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B204-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B205-2007, Standard Form of Architect's Services: Historic Preservation
B205-2007 establishes duties and responsibilities where the architect provides services for projects that are historically sensitive. The range of services the architect provides under this scope spans the life of the project and may require the architect to be responsible for preliminary surveys, applications for tax incentives, nominations for landmark status, analysis of historic finishes, and other services specific to historic preservation projects. B205-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B205-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B205-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B206-2007, Standard Form of Architect's Services: Security Evaluation and Planning
B206-2007 establishes duties and responsibilities where the architect provides services for projects that require greater security features and protection than would normally be incorporated into a building design. This scope requires the architect to identify and analyze the threats to a facility, survey the facility with respect to those threats, and prepare a Risk Assessment Report. Following the owner's approval of the Report, the architect prepares design documents and a Security Report. B206-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B206-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B206-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B207-2008 (formerly B352-2000) Standard Form of Architect's Services: On-Site Project Representation
AIA Document B207-2008 establishes the architect's scope of services when the architect provides an on-site project representative during the construction phase. B207-2008 provides for agreement on the number of architect's representatives to be stationed at the project site, a schedule for the on-site representation, and the services that the on-site representative will perform. The on-site representative's services include attending job-site meetings, monitoring the contractor's construction schedule, observing systems and equipment testing, preparing a log of activities at the site, and maintaining on-site records. The owner will provide an on-site office for the architect's on-site representative. B207-2008 is a scope of services document only and may not be used as a stand-alone owner/architect agreement. B207-2008 replaces AIA Document B352-2000.
$12.00 each

B209-2007, Standard Form of Architect's Services: Construction Phase Administration
B209-2007 establishes duties and responsibilities when an architect provides only Construction Phase services and the owner has retained another architect for design services. This scope requires the architect to perform the traditional contract administration services while design services are provided by another architect. B209-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B209-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B209-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B210-2007, Standard Form of Architect's Services: Facility Support Services
B210-2007 focuses attention on providing the owner with means and measures to ensure the proper function and maintenance of the building and site after final completion. This scope provides a menu of choices of services, including initial existing condition surveys of the building and its systems, evaluation of operating costs, and code compliance reviews. B210-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scopes of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B210-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B210-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B211-2007, Standard Form of Architect's Services: Commissioning
B211-2007 requires that the architect, based on the owner's identification of systems to be commissioned, develop a Commissioning Plan, a Design Intent Document, and Commissioning Specifications. It also requires that the architect review the contractor's submittals and other documentation related to the systems to be commissioned, observe and document performance tests, train operators, and prepare a Final Commissioning Report. B211-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B211-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B211-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B212-2010, Standard Form of Architect's Services: Regional or Urban Planning
AIA Document B212-2010 establishes duties and responsibilities where the architect provides the owner with regional or urban planning services. This scope provides a menu of choices of regional or urban planning services, grouped under four phases: Inventory and Data Gathering; Analysis and Judgment; Preparation of Design Alternatives; and Finalization of Preferred Plan.

AIA Document B212-2010 may be used in two ways: (1) incorporated into the owner/architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to AIA Document G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner/architect agreement. B212-2010 is a scope of services document only and may not be used as a stand-alone owner/architect agreement.
$6.00 each

B214-2007 (formerly B214-2004), Standard Form of Architect's Services: LEED Certification
B214-2007 establishes duties and responsibilities when the owner seeks certification from the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED). Among other things, the architect's services include conducting a pre-design workshop where the LEED rating system will be reviewed and LEED points will be targeted, preparing a LEED Certification Plan, monitoring the LEED Certification process, providing LEED specifications for inclusion in the Contract Documents and preparing a LEED Certification Report detailing the LEED rating the project achieved. B214-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B214-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B214-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B252-2007 (formerly B252-2005), Standard Form of Architect's Services: Architectural Interior Design
B252-2007 establishes duties and responsibilities where the architect provides both architectural interior design services and design services for Furniture, Furnishings and Equipment (FF&E). The scope of services in B252-2007 is substantially similar to the services described in B152-2007. Unlike B152-2007, B252-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B252-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architect's sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B252-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B253-2007, Standard Form of Architect's Services: Furniture, Furnishings and Equipment Design
B253-2007 establishes duties and responsibilities where the architect provides design services for Furniture, Furnishings and Equipment (FF&E). The scope of services in B253-2007 is substantially similar to the services described in B153-2007. Unlike B153-2007, B253-2007 is a scope of services document only and may not be used as a stand-alone owner-architect agreement. B253-2007 may be used in two ways: (1) incorporated into the owner-architect agreement as the architects sole scope of services or in conjunction with other scope of services documents, or (2) attached to G802-2007, Amendment to the Professional Services Agreement, to create a modification to an existing owner-architect agreement. B253-2007 was revised in 2007 to align, as applicable, with B101-2007.
$6.00 each

B727-1988 Standard Form of Agreement Between Owner and Architect for Special Services
B727-1988 provides only the terms and conditions of the agreement between the owner and architect--the description of services is left entirely to the parties, and must be inserted in the agreement or attached in an exhibit. Otherwise, the terms and conditions are similar to those found in B151-1997. B727-1988 is often used for planning, feasibility studies, and other services that do not follow the phasing sequence of services set forth in B151-1997 and other AIA documents. If construction administration services are to be provided using B727-1988, which is not recommended, care must be taken to coordinate it with the appropriate general conditions of the contract for construction. This Document will be DISCONTINUED on April 30, 2012. Available While Supplies Last
$10.00 each

C101-1993, Joint Venture Agreement for Professional Services
This document is intended to be used by two or more parties to provide for their mutual rights and obligations in forming a joint venture. It is intended that the joint venture, once established, will enter into an agreement with the owner to provide professional services. The parties may be all architects, all engineers, a combination of architects and engineers, or another combination of professionals. The document provides a choice between two methods of joint venture operation. The "Division of Compensation" method assumes that services provided and the compensation received will be divided among the parties in the proportions agreed to at the outset of the project. Each party's profitability is then dependent on individual performance of pre-assigned tasks and is not directly tied to that of the other parties. The "Division of Profit and Loss" method is based on each party performing work and billing the joint venture at cost plus a nominal amount for overhead. The ultimate profit or loss of the joint venture is divided between or among the parties at completion of the project, based on their respective interests. C101-1993 was renumbered only in 2007; its content remains the same as in C801-1993.
$12.00 each

C106-2007, Digital Data Licensing Agreement
Serves as a licensing agreement between two parties who otherwise have no existing licensing agreement for the use and transmission of digital data, including instruments of service. C106 defines digital data as information, communications, drawings, or designs created or stored for a specific project in digital form. C106 allows one party to (1) grant another party a limited non-exclusive license to use digital data on a specific project, (2) set forth procedures for transmitting the digital data, and (3)place restrictions on the license granted. In addition, C106 allows the party transmitting digital data to collect a licensing fee for the recipient's use of the digital data.
$10.00 each

C191-2009, Standard Form Multi-Party Agreement for Integrated Project Delivery
AIA Document C191-2009 is a standard form multi-party agreement through which the owner, architect, contractor, and perhaps other key project participants execute a single agreement for the design, construction and commissioning of a Project. AIA Document C191-2008 provides the framework for a collaborative environment in which the parties operate in furtherance of cost and performance goals that the parties jointly establish. The non-owner parties are compensated on a cost-of-the-work basis. The compensation model is also goal-oriented, and provides incentives for collaboration in design and construction of the project. Primary management of the project is the responsibility of the Project Management Team, comprised of one representative from each of the parties. The Project Executive Team, also comprised of one representative from each of the parties, provides a second level of project oversight and issue resolution. The conflict resolution process is intended to foster quick and effective resolution of problems as they arise. This collaborative process has the potential to result in a high quality project for the owner, and substantial monetary and intangible rewards for the other parties.
$14.00 each

C195-2008 Standard Form Single Purpose Entity Agreement for Integrated Project Delivery
AIA Document C195-2008 is a standard form single purpose entity (SPE) agreement through which the owner, architect, construction manager, and perhaps other key project participants, each become members of a limited liability company. The sole purpose of the company is to design and construct a project utilizing the principles of integrated project delivery (IPD) established in Integrated Project Delivery: A Guide. AIA Document C195-2008 provides the framework for a collaborative environment in which the company operates in furtherance of cost and performance goals that the members jointly establish. To obtain project funding, the company enters into a separate agreement with the owner. To design and construct the project, the company enters into separate agreements with the architect, construction manager, other non-owner members, and with non-member consultants and contractors. The compensation model in the non-owner member agreements is goal-oriented and provides incentives for collaboration in design and construction of the project, and for the quick and effective resolution of problems as they arise. This highly collaborative process has the potential to result in a high quality project for the owner, and substantial monetary and intangible rewards for the other members.
$14.00 each

C196-2008 Standard Form of Agreement Between Single Purpose Entity and Owner for Integrated Project Delivery
AIA Document C196-2008 is a standard form of agreement between a single purpose entity (the SPE) and a project owner, called the owner member. C196-2008 is intended for use on a project where the project participants have formed the SPE utilizing AIA Document C195-2008, Standard Form of Single Purpose Entity Agreement for Integrated Project Delivery. C196-2008 is coordinated with C195-2008 in order to implement the principles of integrated project delivery, including the accomplishment of mutually-agreed goals. C196-2008 provides the terms under which the owner member will fund the SPE in exchange for the design and construction of the project. The SPE provides for the design and construction of the project through separate agreements with other members, including an architect and construction manager, utilizing AIA Document C197-2008, Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery. The SPE may also enter into agreements with non-member design consultants, specialty trade contractors, vendors and suppliers.
$12.00 each

C197-2008 Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery
AIA Document C197-2008 is a standard form of agreement between a single purpose entity (the SPE) and members of the SPE that do not own the project, called non-owner members. C197-2008 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195-2008, Standard Form of Single Purpose Entity Agreement for Integrated Project Delivery. C197-2008 is coordinated with C195-2008 in order to implement the principles of integrated project delivery, including the accomplishment of mutually-agreed goals. All members of the SPE, other than the project owner, will execute C197-2008. C197-2008 provides the terms under which the non-owner members provide services to the SPE to complete the design and construction of the project. The specific services the non-owner members are required to perform are set forth in the Integrated Scope of Services Matrix, which is part of the C195-2008 Target Cost Amendment and is incorporated into the executed C197-2008. In exchange for the non-owner members' services, the non-owner members are paid the direct and indirect costs they incur in providing services. Additionally, C197-2008 allows for the non-owner members to receive profit through Incentive Compensation and Goal Achievement Compensation.
$12.00 each

C198-2010, Standard Form of Agreement Between Single Purpose Entity and Consultant for Integrated Project Delivery
AIA Document C198-2010 is a standard form of agreement between a single purpose entity ("the SPE") and a consultant. AIA Document C198-2010 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195-2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery. C198-2010 is coordinated with C195-2008 in order to implement the principles of integrated project delivery. The specific services the consultant is required to perform are set forth within the document as well as the Integrated Scope of Services Matrix, which is part of the C195-2008 Target Cost Amendment. In addition to traditional compensation for services, C198-2010 allows for the consultant to receive additional profit through incentive compensation and goal achievement compensation.
$12.00 each

C199-2010, Standard Form of Agreement Between Single Purpose Entity and Contractor for Integrated Project Delivery
AIA Document C199-2010 is a standard form of agreement between a single purpose entity ("the SPE") and a contractor. AIA Document C199-2010 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195-2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery. C199-2010 is intended to be a flexible document. C199 can be used for a contractor that only provides construction services, or it can also be used for a contractor that will provide both pre-construction and construction services. C199 is not intended for use in competitive bidding and relies upon an agreed to contract sum, which can be either a stipulated sum (fixed price) or cost of the work plus a fee, with a guaranteed maximum price. In addition to compensation for the contract sum, C199 allows for the contractor to receive additional profit through incentive compensation and goal achievement compensation.
$12.00 each

C401-2007, Standard Form of Agreement Between Architect and Consultant
C401-2007 is a standard form of agreement between the architect and the consultant providing services to the architect. C401-2007 is suitable for use with all types of consultants, including consulting architects. This document may be used with a variety of compensation methods. C401-2007assumes and incorporates by reference a preexisting owner-architect agreement known as the Prime Agreement. B101-2007, B103-2007, B104-2007, B105-2007 and B152-2007 are the documents most frequently used to establish the Prime Agreement. C401-2007 was modified in 2007 to be shorter and more flexible by flowing down the provisions of the Prime Agreement, except as specifically stated in C401-2007.
$12.00 each

C441-2008 Standard Form of Agreement Between Architect and Consultant for a Design-Build Project
AIA Document C441-2008 establishes the contractual relationship between the architect and a consultant providing services to the architect on a design-build project. C441-2008 is suitable for use with all types of consultants, including consulting architects and may be used with a variety of compensation methods. C441-2008 assumes and incorporates by reference a preexisting prime agreement between design-builder and architect. C441-2008 was written to ensure consistency with AIA Document B143-2004, Standard Form of Agreement Between Design-Builder and Architect, and with other documents in the AIA 2004 Design-Build family of documents.
$10.00 each

E201-2007, Digital Data Protocol Exhibit
E201-2007 is not a stand-alone document, but must be attached as an exhibit to an existing agreement, such as the B101-2007, Standard Form of Agreement Between Owner and Architect, or A101-2007, Agreement Between Owner and Contractor. Its purpose is to establish the procedures the parties agree to follow with respect to the transmission or exchange of digital data, including instruments of service. E201-2007 defines digital data as information, communications, drawings, or designs created or stored for a specific project in digital form. E201 does not create a separate license to use digital data, because AIA documents for design or construction, to which E201-2007 would be attached, already include those provisions. Parties not covered under such agreements should consider executing AIA Document C106-2007, Digital Data Licensing Agreement.
$6.00 each

G602-1993, Request for Proposal-Geotechnical Services
Similar in structure and format to G601-1994, G602-1993 can form the agreement between the owner and the geotechnical engineer. It allows the owner to tailor the proposal request to address the specific needs of the project. In consultation with the architect, the owner establishes the parameters of service required and evaluates submissions based on criteria such as time, cost, and overall responsiveness to the terms set forth in the Request for Proposal. When an acceptable submission is selected, the owner signs the document in triplicate, returning one copy to the engineer and one to the architect, thus forming the agreement between owner and geotechnical engineer.
$10.00 each

G701CMa-1992,(NOW G732-2009) Change Order, Construction Manager-Adviser Edition
G701CMa-1992 is for implementing changes in the Work agreed to by the owner, contractor, construction manager adviser, and architect. Execution of a completed G701-2000 indicates agreement upon all the terms of the change, including any changes in the Contract Sum (or Guaranteed Maximum Price) and Contract Time. It provides space for the signatures of the owner, contractor, construction manager adviser, and architect, and for a complete description of the change. The major difference between G701CMa-1992 and G701-2001 is that the signature of the construction manager adviser, along with those of the owner, architect, and contractor, is required to validate the change order.

(AVAILABLE WHILE SUPPLIES LAST. DISCONTINUED DECEMBER 31, 2010)
$10.00 50-pack

G704-2000, Certificate of Substantial Completion
G704 is a standard form for recording the date of substantial completion of the work or a designated portion thereof. The contractor prepares a list of items to be completed or corrected, and the architect verifies and amends this list. If the architect finds that the work is substantially complete, the form is prepared for acceptance by the contractor and owner. Appended thereto is the list of items to be completed or corrected. The form provides for agreement as to the time allowed for completion or correction of the items, the date when the owner will occupy the work or designated portion thereof, and a description of responsibilities for maintenance, heat, utilities and insurance.
$28.00 50-pack

G704DB-2004, Acknowledgement of Substantial Completion of a Design-Build Project
Because of the nature of design-build contracting, the project owner assumes many of the construction contract administration duties performed by the architect in a traditional project. Because there is not an architect to certify substantial completion, A141-2004 requires the owner to inspect the project to determine whether the work is substantially complete in accordance with the design-build documents and to acknowledge the date when it occurs. G704DB-2004 is a variation of G704-2000 and provides a standard form for the owner to acknowledge the date of substantial completion.
$28.00 50-pack

G706A-1994, Contractor's Affidavit of Release of Liens
G706A supports G706-1994 in the event that the owner requires a sworn statement of the contractor stating that all releases or waivers of liens have been received. In such event, it is normal for the contractor to submit G706 and G706A, along with attached releases or waivers of liens for the contractor, all subcontractors and others who may have lien rights against the owner's property. The contractor is required to list any exceptions to the sworn statement provided in G706A and may be required to furnish to the owner a lien bond or indemnity bond to protect the owner with respect to such exceptions.
$28.00 50-pack

G710-1992, Architect's Supplemental Instructions
This form is used by the architect to issue additional instructions or interpretations or to order minor changes in the work. It is intended to assist the architect in performing its obligations as interpreter of the contract documents in accordance with the owner-architect agreement and the general conditions of the contract for construction. G710-1992 should not be used to change the contract sum or contract time. It is intended to help the architect perform its services with respect to minor changes not involving adjustment in the Contract Sum or Contract Time. Such minor changes are authorized under Section 7.4 of A201-2007.
$28.00 50-pack

G736-2009 (formerly G722CMa-1992), Project Application and Project Certificate for Payment, Construction Manager as Adviser Edition; and G737-2009 (formerly G723CMa-1992), Summary of Contractors' Applications for Payment, Construction Manager as Adviser Edition
AIA Document G736-2009 is to be used in conjunction with G737-2009, Summary of Contractors' Applications for Payment. These forms are designed to be used on a project where a construction manager is employed as an adviser to the owner, but not as a constructor, and where multiple contractors have separate, direct agreements with the owner. Each contractor submits separate G732-2009 and G703-1992, payment application forms to the construction manager-adviser, who collects and compiles them to complete G736-2009. G737-2009 serves as a summary of the contractors' applications with totals being transferred to G736-2009. The construction manager-adviser can then sign G736-2009, have it notarized, and submit it along with the G737-2009 to the architect. Both the architect and the construction manager must certify the payment amount. NOTE: G722CMa-1992 and G723CMa-1992 expired on December 31, 2010.
$28.00 50/pk

G737-2009 (formerly G723CMa-1992), Summary of Contractors' Applications for Payment, Construction Manager as Adviser Edition
Use AIA Document G736-2009 with AIA Document G737-2009, Summary of Contractors' Applications for Payment. These forms are designed for a project where a construction manager is employed as an adviser to the owner, but not as a constructor, and where multiple contractors have separate, direct agreements with the owner.

Each contractor submits separate AIA Documents G703-1992 and G732-2009, payment application forms, to the construction manager-adviser, who collects and compiles them to complete AIA Document G736-2009. AIA Document G737-2009 serves as a summary of the contractors' applications with totals being transferred to G736. The construction manager-adviser can then sign G736, have it notarized, and submit it along with the G737 to the architect. Both the architect and the construction manager must certify the payment amount. NOTE: G737-2009 replaces AIA Document G723CMa-1992, which expired on December 31, 2010.
$28.00 50-pack

Adobe Acrobat required to view PDF. Click to download.